敏捷生產需要快速響應不斷變化的消費者需求并支持高效生產，批量小至 1。敏捷生產由可快速重新配置的智能互聯資產實現。這些連接的資產實時共享數據；該數據用于通過識別生產中的瓶頸和監控資產的健康狀況以消除計劃外停機來提高運營績效。

基于智能運動解決方案的智能制造消耗更少的能源并支持更復雜的運動，從而推動更高水平的靈活性、生產力和可持續性。

智能運動控制解決方案

適用于智能運動應用的 ADI 技術和系統級解決方案正在實現更高水平的性能，同時減少能耗和停機時間。典型的電機驅動信號鏈由六個關鍵模塊組成。

電力電子

電力電子設備在電機驅動系統中提供電力轉換。對于高壓系統 (>100 V)，使用隔離式柵極驅動器來驅動功率半導體。ADuM4122 是一款具有 3 A 短路電流 (<3 Ω) 的單柵極隔離式柵極驅動器。它支持高達 ~800 V DC 總線的功能性或增強型隔離，具有用于 EMI/功率損耗優化的壓擺率控制。

它還支持用于 SiC 和 GaN 功率半導體的高共模瞬態抗擾度 (CMTI) 和低傳播延遲。

ADuM160N 多通道數字隔離器可用于隔離 PWM 信號，以用于集成了柵極驅動器和功率半導體的集成電源模塊 (IPM)。ADuM6028 隔離式電源器件可與數字隔離器、隔離式收發器和隔離式數據轉換器結合使用，以提供一個非常小型的 8 引腳解決方案，該解決方案已通過全面安全認證，可隨時使用。

對于低壓系統 (<100 V)，LTC7060 是一款具有浮動接地和可編程死區時間的 100 V 半橋驅動器，或者 LTC7000 是一款具有 PassThru 技術和自適應直通的 150 V 保護高側 NMOS 靜態開關驅動器保護可用于驅動低壓半導體。

LTC7000 還支持用于效率優化的可編程死區時間、增強型電流控制和用于降低 EMI 的轉換率控制。

電流檢測

對于隔離式電流檢測測量，ADuM7701 是一款高性能二階 Σ-Δ 調制器，可將模擬輸入信號轉換為基于 Analog Devices iCoupler® 技術的片上數字隔離的高速、單位數據流.

ADuM7703 的低失調漂移（大值為 0.6 μV/°C）可降低扭矩紋波，采用緊湊型 8 引腳封裝，集成 LDO，可簡化電源設計并減小電路板面積。其 150 V/ns min CMTI 額定值可用于 GaN 和 SiC 電力電子設備。

AD8410 高電壓、電流檢測放大器提供高增益（20 V/V、50 V/V、100 V/V）和低失調漂移（~1 μV/°C）和高帶寬（2 MHz），可實現佳電流控制. AD8410 還包括高達 100 V 共模輸入的雙向電流測量輸入。LTC6102 精密零漂移電流檢測放大器確保了在各種工作條件下的準確度，并且可以在基于分流器的電流檢測應用中從高達 100V 的高側電壓供電。



以下是我司【主營產品】，有需要可以發來幫您對比下價格哦!

主營：世界品牌的PLC 、DCS 系統備件 模塊

①Allen-Bradley(美國AB)系列產品》

②Schneider(施耐德電氣)系列產品》

③General electric(通用電氣)系列產品》

④Westinghouse(美國西屋)系列產品》

⑤SIEMENS(西門子系列產品)》

⑥銷售ABB Robots. FANUC Robots、YASKAWA Robots、KUKA Robots、Mitsubishi Robots、OTC Robots、Panasonic Robots、MOTOMAN Robots。

⑦estinghouse(西屋)： OVATION系統、WDPF系統、MAX0系統備件。

⑧Invensys Foxboro(?？怂共_)：I/A Series系統，F(xiàn)BM(現場輸入/輸出模塊)順序控制、梯形邏輯控制、事故追憶處理、數模轉換、輸入/輸出信號處理、數據通信及處理等。Invensys Triconex: 冗余容錯控制系統、基于三重模件冗余(TMR)結構的現代化的容錯控制器。

⑨Siemens(西門子)：Siemens MOORE， Siemens Simatic C1，Siemens數控系統等。

⑩Bosch Rexroth(博世力士樂)：Indramat，I/O模塊,PLC控制器,驅動模塊等。

◆Motorola(摩托)：MVME 162、MVME 167、MVME1772、MVME177等系列。

PLC模塊，可編程控制器，CPU模塊，IO模塊，DO模塊，AI模塊，DI模塊，網通信模塊，

以太網模塊，運動控制模塊，模擬量輸入模塊，模擬量輸出模塊，數字輸入模塊，數字輸出

模塊，冗余模塊，電源模塊，繼電器輸出模塊，繼電器輸入模塊，處理器模塊。



 

Agile production is required to quickly respond to changing consumer demands and support efficient production, down to a batch size of 1. Agile production is enabled by intelligent, connected assets that can be reconfigured quickly. These connected assets share data in real time; this data is used to improve operational performance by identifying bottle necks in production and by monitoring the health of assets to eliminate unplanned downtime.

Smart manufacturing that is built on intelligent motion solutions consumes less energy and enables more complex motion to drive higher levels of flexibility, productivity, and sustainability.

Intelligent motion control solutions

Analog Devices technologies and system-level solutions for intelligent motion applications are enabling higher levels of performance while reducing energy consumption and downtime. A typical motor drive signal chain is comprised of six key blocks.

Power electronics

Power electronics provide the power conversion in a motor drive system. For high voltage systems (>100 V), an isolated gate driver is used to drive the power semiconductors. ADuM4122 is a single-gate isolated gate driver with 3 A short circuit (<3 Ω). It supports functional or reinforced isolation up to ~800 V DC bus with slew rate control for EMI/power loss optimization.

It also supports high common-mode transient immunity (CMTI) and low propagation delay for use with SiC and GaN power semiconductors.

ADuM160N multichannel digital isolators can be used to isolate PWM signals for use with integrated power modules (IPM) that integrate the gate driver with the power semiconductor. The ADuM6028 isolated power device can be used in conjunction with digital isolators, isolated transceivers, and isolated data converters to provide a very small 8-lead solution that is fully safety certified and ready to use.

For low voltage systems (<100 V), the LTC7060, a 100 V half-bridge driver with floating grounds and programmable dead time or the LTC7000, a 150 V protected high-side NMOS static switch driver with PassThru technology and adaptive shoot-through protection can be used to drive low voltage semiconductors.

LTC7000 also supports programmable dead time for efficiency optimization, enhanced current control, and slew rate control for EMI reduction.

Current Sense

For isolated current sense measurement, the ADuM7701 is a high performance, second-order, sigma-delta modulator that converts an analog input signal into a high speed, single-bit data stream with on-chip digital isolation based on Analog Devices iCoupler® technology.

ADuM7703’s low offset drift (0.6 μV/°C max) reduces torque ripple and is packaged in a compact 8-lead package with integrated LDO to simplify power supply design and reduce board area. Its 150 V/ns min CMTI rating enables use with GaN and SiC power electronics.

AD8410 high voltage, current sense amplifiers provide a high gain (20 V/V, 50 V/V, 100 V/V) and low offset drift (~1 μV/°C) with high bandwidth (2 MHz) for optimum current control. AD8410 also includes bidirectional current measurement input up to 100 V common-mode input. The LTC6102 precision zero-drift current sense amplifier ensures accuracy across a wide range of operating conditions and can be powered from high-side voltages up to 100 V in shunt-based current sensing applications.